3com 4500 26-PORT User Manual

C

HAPTER

 8: U

SING

 Q

O

S/ACL C

OMMANDS

 

: Activates Layer 2 ACLs. acl-number: Sequence number 

of ACL, ranging from 4000 to 4999. 

 

: Specifies the subitem of an active ACL, ranging from 0 to 65534; if not 

specified, all subitems of the ACL will be activated. If only an IP ACL or a Layer 2 
ACL is activated, this parameter can be omitted. If both IP and Layer 2 ACLs are 
activated at the same time, the 

 parameter cannot be omitted.

: The set normal traffic, unit in Kbps, the granularity of traffic limit is 

64 kbps, if the number input is in ( N*64 <the number input<(N+1)*64), in which 
N is a natural number, the Switch automaticaly sets (N+1)*64 as the parameter 
value. For 100 Mbps ports, 

 ranges from 64 to 99968 inclusive; for 

1000 Mbps ports, from 64 to 1000000 inclusive. 

 

:  The action taken when the traffic exceeds the threshold. The 

 can be:

■

: Drops the packets.

■

: Sets new DSCP value.

Use the 

command, to activate the ACL and perform traffic 

limitation. Use the 

command to remove traffic limitation.

This command performs traffic limitation on the packets that match with a 
specified ACL rule, and is only effective with a permit rule.

The granularity of traffic limit is 64 kbps.

Perform traffic limitation on packets that match the permit rule of ACL 2000. The 
target traffic rate is 128 kbps.

<4500>system-view

System View: return to User View with Ctrl+Z

[4500]interface Ethernet 1/0/1

[4500-Ethernet1/0/1] traffic-limit inbound ip-group 2000 128 

[4500-Ethernet1/0/1]

Ethernet Port View

queue-index:

 index of output queue, in the range of 0~7.