3com 4500 26-PORT User Manual
RADIUS Protocol Configuration Commands
291
Description
Use the
timer response-timeout
command to configure the RADIUS server
response timer.
Use the
undo timer
command to restore the default.
If the NAS receives no response from the RADIUS server after sending a RADIUS
request (authentication/authorization or accounting request) for a period of time,
the NAS resends the request, thus ensuring the user can obtain the RADIUS
service. You can specify this period by setting the RADIUS server response timeout
timer, taking into consideration the network condition and the desired system
performance.
request (authentication/authorization or accounting request) for a period of time,
the NAS resends the request, thus ensuring the user can obtain the RADIUS
service. You can specify this period by setting the RADIUS server response timeout
timer, taking into consideration the network condition and the desired system
performance.
Related commands:
radius scheme
,
retry
.
Example
To set the response timeout timer in the RADIUS scheme 3Com to 5 seconds,
enter the following:
enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]radius scheme 3Com
[4500-radius-3Com]timer response-timeout 5
user-name-format
Syntax
user-name-format { with-domain | without-domain }
View
RADIUS Scheme View
Parameter
with-domain:
Specifies to send the username with domain name to RADIUS
server.
without-domain:
Specifies to send the username without domain name to
RADIUS server.
Description
Use the
user-name-format
command to configure the username format sent to
RADIUS server.
By default, the username sent to RADIUS servers includes the ISP domain name.
The supplicants are generally named in
userid@isp-name
format. The part
following “@” is the ISP domain name. The Switch will put the users into certain
ISP domains according to the domain names. However, some earlier RADIUS
servers reject the username including the ISP domain name. In this case, the
username will be sent to the RADIUS server after its domain name is removed.
Accordingly, the Switch provides this command to decide whether the username
that is to be sent to RADIUS server carries the ISP domain name or not.
ISP domains according to the domain names. However, some earlier RADIUS
servers reject the username including the ISP domain name. In this case, the
username will be sent to the RADIUS server after its domain name is removed.
Accordingly, the Switch provides this command to decide whether the username
that is to be sent to RADIUS server carries the ISP domain name or not.
If a RADIUS scheme is configured to reject usernames including ISP domain names,
the RADIUS scheme shall not be simultaneously used in more than one ISP
the RADIUS scheme shall not be simultaneously used in more than one ISP