3com 4500 26-PORT User Manual

By default, if some running configuration parameters are the same with the 
default operational parameters, they will not be displayed.

If a user needs to authenticate whether the configurations are correct after 
finishing a set of configuration, the 

 command 

can be used to display the running parameters. Although the user has configured 
some parameters, but the related functions are not effective, they are not 
displayed. 

When there is much configuration information to use the regular expression to 
filter the output information. For specific rules about the regular expression, refer 
to the Switch 4500 Configuration Guide.

Related commands: 

, 

, 

.

To view the running configuration parameters of the switch, enter the following:

<4500>display current-configuration

local-server nas-ip 127.0.0.1 key 3com

domain default enable system

queue-scheduler wrr 1 2 3 4 5 9 13 15

ip http acl 2000

radius scheme system

domain system

acl number 2000 match-order auto

 rule 0 permit

acl number 3000

acl number 4000

rule 0 permit

qos-profile student

 packet-filter inbound ip-group 2000 rule 0

  ---- More ----

To view the lines containing the character string “10*” in the configuration 
information, enter the following. The “*” indicates that the “0” before it can 
appear 0 times or multiple consecutive times.

<4500>display current-configuration | include 10*

local-server nas-ip 127.0.0.1 key 3com

queue-scheduler wrr 1 2 3 4 5 9 13 15

 traffic-limit inbound ip-group 2000 rule 0 128 exceed drop

vlan 1

 ip address 1.1.1.2 255.255.255.0

interface Aux1/0/0

interface Ethernet1/0/1

 webcache address 1.1.1.1 mac 00e0-fc01-0101 vlan 40

 traffic-limit inbound ip-group 2000 rule 0 128

traffic-redirect inbound ip-group 2000 rule 0 interface 

Ethernet1/0/1

line-rate inbound 128

 queue-scheduler wrr 1 2 3 4 5 6 7 8

interface Ethernet1/0/2

interface Ethernet1/0/3

interface Ethernet1/0/4

interface Ethernet1/0/5