Manualsbrain.com
  1. Manuals
  2. Brands
  3. 3com
  4. 4500 26-PORT
  5. User Manual

3com 4500 26-PORT User Manual

Download
Page of 466
366
C
HAPTER
 12: U
SING
 S
YSTEM
 M
ANAGEMENT
 C
OMMANDS
Example
Configure to send log information to the UNIX workstation at 202.38.160.1.
<SW4500>system-view
System View: return to User View with Ctrl+Z.
[SW4500]info-center loghost 202.38.160.1
[SW4500]
info-center loghost 
source
syntax
info-center loghost source interface-name
undo info-center source
View
System view
Parameter
source interface-name:
 Sets the source address of packets sent to the loghost 
as the address of the interface specified by 
interface-name
. Normally, the 
interface is a VLAN interface.
Description
Use the 
info-center loghost source
 command to set the source address of 
packets sent to the loghost as the address of the interface specified by the 
interface-name
 parameter. 
Use the 
undo info-center loghost source
 command to cancel the setting of 
the source address of the packets sent to the loghost.
This command takes effect only after the system logging is enabled. 
Related commands: 
info-center enable
, 
display info-center
.
Example
Set the source address of the packets sent to the loghost as the address of the 
VLAN interface 1.
<SW4500>system-view
System View: return to User View with Ctrl+Z.
[SW4500]info-center loghost source vlan-interface 1
[SW4500]
info-center monitor 
channel
Syntax
info-center monitor channel { channel-number | channel-name }
undo info-center monitor channel
View
System view
Parameter
channel-number:
 Channel number, ranging from 0 to 9, that is, the system has 
ten channels.