3com 4500 26-PORT User Manual
370
C
HAPTER
12: U
SING
S
YSTEM
M
ANAGEMENT
C
OMMANDS
Description
Use the
info-center source
command to add/delete a record to the information
channel. Use the
undo info-center source
command to delete the contents of
the information channel.
For example, for the filter of IP module log output, you can configure to output
the logs at a level higher than warnings to the log host and output those higher
than informational to the log buffer. You can also configure to output the trap
information on the IP module to a specified trap host, etc.
the logs at a level higher than warnings to the log host and output those higher
than informational to the log buffer. You can also configure to output the trap
information on the IP module to a specified trap host, etc.
The channels for filtering in all the directions are specified by this configuration
command. All the information will be sent to the corresponding directions
through the specified channels. You can configure the channels in the output
direction, channel filter information, filtering and redirecting of all kinds of
information.
command. All the information will be sent to the corresponding directions
through the specified channels. You can configure the channels in the output
direction, channel filter information, filtering and redirecting of all kinds of
information.
At present, the system distributes an information channel in each output direction
by default, shown as follows:
by default, shown as follows:
QACL
QoS/ACL module
QOSF
Qos profile module
RDS
Radius module
RM
Routing management
RMON
Remote monitor module
RSA
Revest, shamir and adleman encryption system
RTPRO
Routing protocol
SHELL
User interface
SNMP
Simple network management protocol
SOCKET
Socket
SSH
Secure shell module
STP
Spanning tree protocol module
SYSMIB
System MIB module
TELNET
Telnet module
UDPH
UDP helper module
VFS
Virtual file system module
VTY
Virtual type terminal module
WCN
Web management module
XM
XModem module
Table 37 Information Channel in Each Output Direction by Default
Output direction
Information channel name
Console
console
Monitor
monitor
Info-center loghost
loghost
Log buffer
logbuffer
Table 36 Module names in logging information
Module name
Description