3com 4500 26-PORT User Manual

This section describes the SFTP server configuration commands available on your 
Switch 4500.

System View

None

Use the 

 command to start the SFTP server.

Use the 

 command to shutdown the SFTP server.

By default, the SFTP server is shutdown.

To start the SFTP server, enter the following:

[SW4500]sftp server enable

To shutdown the SFTP server, enter the following:

[SW4500]undo sftp server

ssh user username service-type { stelnet | sftp | all }

undo ssh user username service-type

System View

 Local username or username defined by the remote RADIUS/TACACS 

server. It is a string with a length of 1 to 80 characters.

 Specifies the service type as secure Telnet.

 Specifies the service type as secure FTP.

Includes both stelnet and sftp service types.