3com 4500 26-PORT User Manual

Use the 

 command to configure the default VLAN ID of 

the hybrid port. Use the 

 command to restore the default 

VLAN ID of the hybrid port.

Hybrid port can be configured together with the isolate-user-vlan. But if the 
default VLAN has set mapping in the isolate-user-vlan, the default VLAN ID cannot 
be modified. If you want to modify it, cancel the mapping first. 

The default VLAN ID of local hybrid port must be consistent with that of the peer 
one, otherwise, the packets cannot be properly transmitted.

Related command: 

To configure the default VLAN of the hybrid port Ethernet1/0/1 to VLAN100, enter 
the following.

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]interface ethernet 1/0/1

[4500-Ethernet1/0/1]port link-type hybrid

[4500-Ethernet1/0/1]port hybrid pvid vlan 100

[4500-Ethernet1/0/1]

port hybrid vlan vlan_id_list { tagged | untagged }

Ethernet Port View

Enter a VLAN ID, or more than one VLAN ID, in the range 2 to 

4094. The hybrid port will be added to the specified VLANs. This can be a single 
VLAN, a series of individual VLANs separated by a space, or the first VLAN in a 
range of VLANs (

vlan_id to last_vlan_id

). 

Enter to tag the port for the specified VLAN.

Enter to leave the port untagged for the specified VLAN.

Use the 

 command to add the port to the specified VLAN(s). 

The port needs to have been made a hybrid port before you can do this. See the 
related command below. Use the 

 command to remove 

the port from the specified VLAN(s).