3com 4500 26-PORT User Manual
Ethernet Port Link Aggregation Commands
65
undo debugging lacp packet [ interface { interface_type
interface_number | interface_name } [ to { interface_type
interface_num | interface_name } ] ]
View
User View
Parameter
interface
{ interface_type interface_ num | interface_name }
[
to
{
interface_type interface_ num
| interface_name } ]
: Specifies ports. You
can specify multiple sequential ports with the
to
parameter, instead of specifying
only one port.
interface_name:
Specifies port name, in the format of
interface_name =
interface_type interface_num.
interface_type:
Specifies port type and
interface_num
port number.
For more information, see the parameter item for the
interface
command.
Description
Use the
debugging lacp packet
command to enable LACP packets debugging at
a designated port or ports. Use the
undo debugging lacp packet
command to
disable LACP packets debugging at a designated port or ports.
Example
To enable LACP packets debugging at Ethernet1/0/1, enter the following:
<4500>debugging lacp packet interface ethernet1/0/1
debugging lacp state
Syntax
debugging lacp state
[ interface
{ interface_type interface_number |
interface_name
} [
to
{ interface_type interface_num | interface_name
} ] ] { {
actor-churn | mux | partner-churn | ptx | rx
}* | all
}
undo debugging lacp state
[
interface
{ interface_type
interface_number
| interface_name } [ to { interface_type
interface_num
| interface_name } ] ] { {
actor-churn | mux |
partner-churn | ptx | rx }* | all
}
View
User View
Parameter
interface
{ interface_type interface_num | interface_name } [ to
{
interface_type
interface_num | interface_name } ]:
Specifies ports. You
can specify multiple sequential ports with the
to
parameter, instead of specifying
only one port.