3com 4500 26-PORT User Manual
Ethernet Port Link Aggregation Commands
73
System View: return to User View with Ctrl+Z.
[4500]link-aggregation group 22 mode manual
[4500]interface ethernet 1/0/1
[4500-Ethernet1/0/1]port link-aggregation group 22
#Apr 2 03:29:48:954 2000 4500 LAGG/2/AggPortInactive:- 1 -Trap
1.3.6.1.4.1.2
011.5.25.25.2.2: TrapIndex 31465473 Aggregation Group 22: port
member Ethernet1/
0/1 becomes INACTIVE!
[4500-Ethernet1/0/1]
reset lacp statistics
Syntax
reset lacp statistics
[ interface { interface_type interface_number
| interface_name } [ to { interface_type interface_num |
interface_name
} ] ]
View
User View
Parameter
interface
{ interface_type interface_ num | interface_name } [ to {
interface_type interface_ num
| interface_name } ]:
Specifies ports. You
can specify multiple sequential ports with the
to
parameter, instead of specifying
only one port.
interface_name:
Specifies port name, in the format of
interface_name =
interface_type interface_num.
interface_type:
Specifies port type and
interface_num
port number.
For more information, see the parameter item for the
interface
command.
Description
Use the
reset lacp statistics
command to clear LACP statistics at a
designated port. If no port is specified, then LACP statistics at all ports shall be
cleared.
cleared.
Related command:
display link-aggregation interface
.
Example
To clear LACP statistics at all Ethernet ports, enter the following:
<4500>reset lacp statistics