Panasonic AW-PB605P User Manual
4
Installing additional video boards
(The installation work must be performed by your dealer without fail.)
The multi-function controller AW-RP605 comes with four slots for installing additional video
boards.
By adding the AW-PB605 video boards, up to five pan-tilt head systems can be controlled.
boards.
By adding the AW-PB605 video boards, up to five pan-tilt head systems can be controlled.
1. Remove the two screws and take off the blank panel.
2. Align the AW-PB605 video board with the guides, and insert it.
Push it in all the way.
3. Attach the board securely using the two screws.
Before adding a board to the multi-function controller
O
Set the power switches of all components to the OFF position, and disconnect the
power cords from the power outlets.
power cords from the power outlets.
O
Release the static carried in the body of the person to perform the installation.
Installation can be performed more safely if an anti-static wrist strap is worn.
Touching the board without first releasing this static may cause malfunctioning.
Installation can be performed more safely if an anti-static wrist strap is worn.
Touching the board without first releasing this static may cause malfunctioning.
O
Do not allow the metal part of the board come in contact with any other metal parts.
Guides
Refer to the Operating Instructions of the AW-RP605 Multi-Function Controller for
further details on how to connect this board.
further details on how to connect this board.