3com 4500 50-PORT User Manual
104
C
HAPTER
5: U
SING
N
ETWORK
P
ROTOCOL
C
OMMANDS
Example
To establish a mapping between IP address 129.102.0.1 and MAC address
00e0-fc01-0000, and to send frames to this address through VLAN 1, Ethernet
port 1/0/1, enter the following:
00e0-fc01-0000, and to send frames to this address through VLAN 1, Ethernet
port 1/0/1, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]arp static 202.38.0.10 00e0-fc01-0000 1 arp timer aging
Syntax
arp timer aging aging_time
undo arp timer aging
View
System View
Parameter
aging_time
Enter the aging time of dynamic ARP aging timer, in the range 1 to
1440 minutes. The default is 20 minutes.
Description
Use the
arp timer aging
command to configure the dynamic ARP aging timer.
Use the
undo arp timer aging
command to restore the default time of 20
minutes.
Related commands:
display arp timer aging
Example
To configure the dynamic ARP aging timer to 10 minutes, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]arp timer aging 10
debugging arp packet
Syntax
debugging arp [ packet | error | info packet ]
undo debugging arp packet
View
User View
Parameters
error
Enter to enable ARP error debugging.
info
Enter to enable ARP mapping table and information management
debugging.
packet
Enter to enable ARP packet debugging.