3com 4500 50-PORT User Manual

User view

None

Use the 

 command to clear the UDP statistics information.

To clear the UDP traffic statistics information, enter the following:

<4500>reset udp statistics

System View

 Enter the TCP finwait timer value in second, with the value ranging 

from 76 to 3600; By default, 675 seconds.

Use the 

command to configure the TCP finwait timer.

Use the 

 command to restore the default value of 

the TCP finwait timer.

When the TCP connection state changes from FIN_WATI_1 to FIN_WAIT_2, the 
finwait timer is enabled. If the switch does not receive FIN packet before finwait 
timer timeouts, the TCP connection will be terminated.

Related commands: 

, 

.

To configure the TCP finwait timer value as 800 seconds, enter the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]tcp timer fin-timeout 800