3com 4500 50-PORT User Manual
262
C
HAPTER
11: U
SING
AAA
AND
RADIUS C
OMMANDS
Related command:
domain
Example
To enable the user in the current ISP domain, 3Com163.net, to use the idle-cut
attribute specified in the user template (that is, enabling the user to use the
idle-cut function). The maximum idle time is 50 minutes and the minimum data
traffic is 500 bytes.
attribute specified in the user template (that is, enabling the user to use the
idle-cut function). The maximum idle time is 50 minutes and the minimum data
traffic is 500 bytes.
<4500> system-view
System View: return to User View with Ctrl+Z.
[4500]domain marlboro.net
[4500-isp-marlboro.net]idle-cut enable 50 500
level
Syntax
level level
undo level
View
Local User View
Parameter
level:
Specifies user priority level, an integer ranging from 0 to 3.
Description
Use the
level
command to configure user priority level. Use the
undo level
command to restore the default user priority level.
By default, the user priority level is 0.
Related command:
local-user
If the configured authentication mode is none authentication or password
authentication, the command level that a user can access after login depends on
the priority of user interface. In the case of authentication requiring both
username and password, however, the accessible command level depends on user
priority level.
authentication, the command level that a user can access after login depends on
the priority of user interface. In the case of authentication requiring both
username and password, however, the accessible command level depends on user
priority level.
Example
To set the priority level of the user 3Com to 3, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]local-user 3Com1
[4500-luser-3Com1]level 3
local-user
Syntax
local-user user-name
undo local-user { user-name | all [ service-type { telnet | ftp |
lan-access | ssh | terminal } ] }