3com 4500 50-PORT User Manual
RADIUS Protocol Configuration Commands
285
For detailed information, read the Description of the
primary accounting
command.
Related commands:
key
,
radius scheme
,
state
.
Example
To set the IP address of the second accounting server of RADIUS scheme, 3Com, to
10.110.1.1 and the UDP port 1813 to provide RADIUS accounting service, enter
the following:
10.110.1.1 and the UDP port 1813 to provide RADIUS accounting service, enter
the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]radius scheme 3Com
[4500-radius-3Com]secondary accounting 10.110.1.1 1813
secondary
authentication
Syntax
secondary authentication ip-address [ port-number ]
undo secondary authentication
View
RADIUS Scheme View
Parameter
ip-address:
IP address, in dotted decimal format. By default, the IP addresses of
second authentication/authorization is at 0.0.0.0.
port-number:
Specifies the UDP port number, ranging from 1 to 65535. By
default, the authentication/authorization service is provided via UDP 1812
Description
Use the
secondary authentication
command to configure the IP address and
port number for the second RADIUS authentication/authorization. Use the
undo
secondary authentication
command to restore the IP address and port number
to default values.
For detailed information, read the Description of the
primary authentication
command.
Related commands:
key
,
radius scheme
,
state
.
Example
To set the IP address of the second authentication/authorization server of RADIUS
scheme, “3Com”, to 10.110.1.2 and the UDP port 1812 to provide RADIUS
authentication/authorization service, enter the following:
scheme, “3Com”, to 10.110.1.2 and the UDP port 1812 to provide RADIUS
authentication/authorization service, enter the following:
<4500>system-view
System View: return to User View with Ctrl+Z.
[4500]radius scheme 3Com
[4500-radius-3Com]secondary authentication 10.110.1.2 1812
server-type
Syntax
server-type
{ 3com | standard }