3com 4500 50-PORT User Manual

Related commands: 

, 

.

To set the response timeout timer of RADIUS scheme, 3Com, to 5 seconds, enter 
the following:

<4500>system-view

System View: return to User View with Ctrl+Z.

[4500]radius scheme 3Com

[4500-radius-3Com]timer 5

RADIUS Scheme View

 Quiet time interval, ranging from 1 to 255 in minutes. The default value 

is 5.

Use the 

 command to set the quiet time interval after which the 

primary and secondary RADIUS scheme servers switch over. Use the 

 to set the quiet time interval to its default value.

The functions of the quite time interval are as follows:

1 The Switch sends RADIUS packets to the primary RADIUS server.

2 If the Switch affirms that the primary server does not respond, it then sends 

RADIUS packets to the secondary RADIUS server.

3 After each quiet time interval, the Switch sets the status of the primary RADIUS 

server to active and sends RADIUS packets to it next time.

To set the quiet time interval of the RADIUS server group ‘3Com’ to 3 minutes, 
enter the following:

<4500>system-view

 

System View: return to User View with Ctrl+Z

 

[4500]radius scheme 3com

 

[4500-radius-3com]timer quiet 3

timer realtime-accounting minutes

RADIUS Scheme View