3com 4500 50-PORT User Manual
Log Commands
361
Log Commands
This section displays the logging options available on your Switch 4500.
display channel
Syntax
display channel [ channel-number | channel-name ]
View
All views
Parameter
channel-number:
Channel number, ranging from 0 to 9, that is, the system has
ten channels.
channel-name:
Specify the channel name, the name can be
console, monitor,
loghost, trapbuffer, logbuffer, snmpagent, channel6, channel7,
channel8, channel9.
Where console is channel 0, monitor is channel 1, loghost
is channel 2, trapbuffer is channel 3, logbuffer is channel 4 and snmpagent is
channel 5.
channel 5.
Description
Use the
display channel
command to display the details about the information
channel.
Without a parameter, the
display channel
command shows the configurations
of all the channels.
Example
Show details about the information channel 0.
<SW4500>display channel 0
channel number:0, channel name:console
MODU_ID
NAME
ENABLE
LOG_LEVEL ENABLE TRAP_LEVEL
ENABLE DEBUG_LEVEL
ffff0000 default Y
warning
Y
debugging
Y
debugging
display info-center
Syntax
display info-center
View
All views
Parameter
None
Description
Use the
display info-center
command to display the configuration of system
log and the information recorded in the memory buffer.
If the information in the current log/trap buffer is less than the specified sizeval,
display the actual log/trap information.
display the actual log/trap information.