Panasonic 1200N User Manual
Maintenance and Operations
MAT and NMS
Centillion 1200N ATM Switch User Manual
9-3
NTP 297-8103-903
Physical
Connection of
MAT
Connection of
MAT
In connecting the ATM Switch and MAT, use a RS-232C cross cable fitted on one
end with a D-SUB 9 pin (male) connector for the ATM Switch and on the other end
with a connector meeting the shape of the MAT side connector.
end with a D-SUB 9 pin (male) connector for the ATM Switch and on the other end
with a connector meeting the shape of the MAT side connector.
There are two types of RS-232C cables used, straight cable and cross cable,
depending on the difference in the connection conditions of signal lines. Use the
RS-232C cross cable for connecting the ATM Switch and MAT.
depending on the difference in the connection conditions of signal lines. Use the
RS-232C cross cable for connecting the ATM Switch and MAT.
The RS-232C connector of the MAT differs in shape depending on the model of the
MAT. Use an RS-232C cross cable that has on one end a connector that can be
connected to the MAT and on the other end a D-SUB 9-pin male connector for the
ATM Switch.
MAT. Use an RS-232C cross cable that has on one end a connector that can be
connected to the MAT and on the other end a D-SUB 9-pin male connector for the
ATM Switch.
This section describes how to set PC9801 or IBM-PC as the MAT.
show the RS-232C connector.
and
respectively.
The shape of the RS-232C connector on the 98 side is a D-SUB 25-pin (male)
connector.
connector.
The shape of the RS-232C connector on the IBM-PC side is a D-SUB 9-pin (male)
connector.
connector.