Panasonic 1200N User Manual

Page of 256
Upgrading Software
Modifications
10-20
Centillion 1200N ATM Switch User Manual
NTP 297-8103-903
FLASH_UP Mode
Load the software from the ATA card mounted in the PCMCIA slot #0.  The office
data is loaded from the ATA card mounted in the PCMCIA slot #1.  Office data is
not saved.
Figure 10-24:  FLASH_UP Mode
Procedure
1.
Turn off the power of the ATM Switch.
2.
Insert the new version ATA card in PCMCIA slot #0 and the ATA card 
containing the office data you wish to continue to use in PCMCIA slot #1.  
3.
Turn on the power of the ATM Switch and start the boot monitor. 
4.
Set the boot mode as follows:
BOOT# SET boot flash_up
5.
End the boot monitor:
BOOT# QUIT