Panasonic 1200N User Manual

■

It is dangerous to use the equipment when it is malfunctioning. If you detect an 
irregular condition (irregular noise, irregular odor, or smoke), immediately turn 
off the main power, remove the power plug from the outlet, and call for service.

■

To prevent electric shock or a failure, do not pour liquid such as water inside 
the equipment or touch the equipment with a wet hand. If liquid is accidentally 
spilled inside the equipment, turn off the main power, remove the power plug 
from the outlet, and call for service. Even if the equipment appears to be dry, 
if there is liquid left inside the equipment, electric shock or a failure may result.

■

Do not touch any internal part of the equipment, or modify or disassemble the 
equipment. Electric shock, fire, or a failure may result.

■

The ATM Switch is precision equipment. Keep it away from vibration. 

■

Do not install the equipment where it is susceptible to vibration. Vibration may 
cause the equipment to fail.

■

To prevent a failure, do not place any foreign objects inside the equipment.

■

Static electricity may cause the equipment to fail. To prevent damage from static 
electricity, be sure the equipment is adequately grounded.

■

When touching a connector of the equipment, be careful of electrostatic 
damage. Be sure to use an electrostatic prevention kit and wear gloves when 
handling the equipment.

■

This equipment is normally used with its power on. No one other than the person 
in charge of the system should touch the power switch. When power is turned 
off, communications will be severed. In addition, all unsaved data settings will 
be lost.

Once operation begins, the user need not control the equipment. The user merely
needs to carefully read the handling precautions in this chapter and provide an
environment around the equipment so the switch can function properly.

When an error occurs to the equipment during operation, the ALARM LED on the
front of the equipment will light. In this case, promptly call the system manager. 

■

Protect the equipment from excessive heat or cold. (Do not expose the 
equipment to direct sunlight or place heat-radiating equipment near the switch.)

■

Ensure adequate ventilation.

■

Do not install the equipment where it is constantly humid or it is dusty.

■

Do not place a radio, television, or any other equipment that produces strong 
magnetism near the ATM Switch.