Panasonic 1200N User Manual

Page of 256
P
Glossary
B-58
Centillion 1200N ATM Switch User Manual
NTP 297-8103-903
PLL 
Phase Lock Loop: Phase Lock Loop is a mechanism whereby timing information 
is transferred within a data stream and the receiver derives the signal element timing 
by locking its local clock source to the received timing information. 
PLO
Phase Locked Oscillator
PM 
Physical Medium: Physical Medium refers to the actual physical interfaces. Several 
interfaces are defined including STS-1, STS-3c, STS-12c, STM-1, STM-4, DS1, 
E1, DS2, E3, DS3, E4, FDDI-based, Fiber Channel-based, and STP. These range 
in speeds from 1.544Mbps through 622.08 Mbps. 
PMD 
Physical Media Dependent: This sublayer defines the parameters at the lowest 
level, such as speed of the bits on the media. 
PNI 
Permit Next Increase: An ABR service parameter, PNI is a flag controlling the 
increase of ACR upon reception of the next backward RM-cell. PNI=0 inhibits 
increase. The range is 0 or 1. 
PNNI 
Private Network-Network Interface: A routing information protocol that enables 
extremely scalable, full function, dynamic multi-vendor ATM switches to be 
integrated in the same network. 
PNNI Protocol Entity 
The body of software in a switching system that executes the PNNI protocol and 
provides the routing service. 
PNNI Routing Control Channel 
VCCs used for the exchange of PNNI routing protocol messages. 
PNNI Routing Domain 
A group of topologically contiguous systems which are running one instance of 
PNNI routing.