Panasonic 1200N User Manual
Glossary
S
Centillion 1200N ATM Switch User Manual
B-71
NTP 297-8103-903
Split System
A switching system which implements the functions of more than one logical node.
SPTS
Single Program Transport Stream: An MPEG-2 Transport Stream that consists of
only one program.
only one program.
SR
Source Routing: A bridged method whereby the source at a data exchange
determines the route that subsequent frames will use.
determines the route that subsequent frames will use.
SRF
Specifically Routed Frame: A Source Routing Bridging Frame which uses a
specific route between the source and destination.
specific route between the source and destination.
SRT
Source Routing Transparent: An IETF Bridging Standard combining Transparent
Bridging and Source Route Bridging.
Bridging and Source Route Bridging.
SRTS
Synchronous residual Time Stamp: A clock recovery technique in which difference
signals between source timing and a network reference timing signal are
transmitted to allow reconstruction of the source timing at the destination.
signals between source timing and a network reference timing signal are
transmitted to allow reconstruction of the source timing at the destination.
SSCF
Service Specific Coordination Function: SSCF is a function defined in Q.2130, B-
ISDN Signaling ATM Adaptation Layer-Service Specific Coordination Function
for Support of Signaling at the User-to- Network Interface.
ISDN Signaling ATM Adaptation Layer-Service Specific Coordination Function
for Support of Signaling at the User-to- Network Interface.
SSCOP
Service Specific Connection Oriented Protocol: An adaptation layer protocol
defined in ITU-T Specification: Q.2110.
defined in ITU-T Specification: Q.2110.
SSCS
Service Specific Convergence Sublayer: The portion of the convergence sublayer
that is dependent upon the type of traffic that is being converted.
that is dependent upon the type of traffic that is being converted.
SSO
Switch Specific Overhead