3com 5104M-FIB User Manual
2-100
SET BRIDGE_PORT NAME
SET BRIDGE_PORT
NAME
NAME
Use the SET BRIDGE_PORT NAME command to assign a name to a
SwitchModule bridge port.
SwitchModule bridge port.
Format
Example
The following command assigns the name finance_1 to port 3 on the
SwitchModule in slot 5:
SwitchModule in slot 5:
CB5000> set bridge_port 5.3 name finance_1
Related Command
SHOW BRIDGE_PORT
slot.port
Identifies the port for this operation.
slot (1 through 17) is the slot number and port (1 through 24) is the port
number. For example, to identify port 4 on the module in slot 6, enter
number. For example, to identify port 4 on the module in slot 6, enter
6.4
slot.all
Specifies that all ports in the slot are affected by this operation.
name
The name (up to 32 characters) you want to identify this port.
set bridge_port
name
slot.port
name
slot.all