3com 5104M-FIB User Manual
SET SECURITY PORT ACTION_ON_ INTRUSION
2-235
SET SECURITY PORT
ACTION_ON_
INTRUSION
ACTION_ON_
INTRUSION
Use the SET SECURITY PORT ACTION_ON_INTRUSION command to define the
action the DMM takes when a port-to-MAC address security intrusion occurs.
action the DMM takes when a port-to-MAC address security intrusion occurs.
The DMM always logs the intrusion in the Intruder List.
Format
Example
The following command specifies that the DMM take no action when an
intrusion occurs on port 1 in slot 3:
intrusion occurs on port 1 in slot 3:
CB5000> set security port 3.1 action_on_intrusion no_action
Port 03.01 action_on_intrusion set to NO_ACTION.
Related Command
SHOW SECURITY INTRUDER_LIST
set security port
slot.port
disable_and_trap
disable_only
action_on_intrusion
no_action
trap_only
slot.all
slot.port
Identifies the port for this operation.
slot (1 through 17) is the location of a module in the hub and
port is the port number on the specified module. For example, to
identify port 4 on the 6, enter
port is the port number on the specified module. For example, to
identify port 4 on the 6, enter
6.4
slot.all
Specifies all ports on the module in a slot.
disable_and_trap
When an intrusion occurs, the DMM disables the port and sends
traps as defined in the community table. This is the factory setting.
traps as defined in the community table. This is the factory setting.
disable_only
When an intrusion occurs, the DMM disables the port, but sends
no traps.
no traps.
no_action
When an intrusion occurs, the DMM takes no action.
trap_only
When an intrusion occurs, the DMM send traps as defined in the
community table, but does not disable the port.
community table, but does not disable the port.