3com 5104M-FIB User Manual
SET SECURITY_ADVANCED NETWORK INTRUDER_PORT_ DISABLING
2-243
SET
SECURITY_ADVANCED
NETWORK
INTRUDER_PORT_
DISABLING
SECURITY_ADVANCED
NETWORK
INTRUDER_PORT_
DISABLING
Use the SET SECURITY_ADVANCED NETWORK INTRUDER_PORT_DISABLING
command to automatically disable ports that receive intruder packets on an
Ethernet network that has an Ethernet Private Line Card assigned to it.
command to automatically disable ports that receive intruder packets on an
Ethernet network that has an Ethernet Private Line Card assigned to it.
When you enable intruder port disabling, ports that transmit intruder packets
are disabled automatically.
are disabled automatically.
If you enable intruder port disabling on your network, you must also enable
either the source port checking or the source address checking network
parameter. If you do not enable either of these parameters, the host module
does not detect intruder packets.
either the source port checking or the source address checking network
parameter. If you do not enable either of these parameters, the host module
does not detect intruder packets.
If you enable intruder port disabling, intruder reporting is automatically enabled
as well.
as well.
Format
Example
The following command disables intruder ports on ethernet_1:
CB5000> set security_advanced network ethernet_1
intruder_port_disabling enable
ETHERNET_1 Intruder Port Disabling: set to ENABLED.
ETHERNET_1 Intruder Reporting: set to ENABLED.
Related Command
SHOW SECURITY_ADVANCED
ethernet_1...8
Specifies which Ethernet network to apply this command.
isolated_1...8
Specifies which isolated network to apply this command.
enable
Enables intruder port disabling.
disable
Disables intruder port disabling.
set security_advanced network
enable
ethernet_
1...8
intruder_port_disabling
disable
isolated_
1...8