3com 5104M-FIB User Manual
2-316
SHOW BPORT_LEC SERVER_CIRCUITS
SHOW BPORT_LEC
SERVER_CIRCUITS
SERVER_CIRCUITS
Use the SHOW BPORT_LEC SERVER_CIRCUITS command to display the LAN
emulation control and multicast circuits for the specified LAN Emulation
Client (LEC).
emulation control and multicast circuits for the specified LAN Emulation
Client (LEC).
BPORT is an abbreviation for Bridge Port.
LEC ports are logical ports, all of which overlay one physical ATM/Synchronous
Optical Network (SONET) port.
Optical Network (SONET) port.
Format
Example
The following command displays the multicast circuits for the LEC in slot 4,
port 1:
port 1:
CB5000> show bport_lec 4.1 server_circuits
Bridge Port LEC Display for Module 6602M-MOD:
BP LEC
Mode
Status
General Info
------
--------
--------------------------
04.01
ENABLED
OKAY
Configuration Direct VPI/VCI:
0/0
Control Direct VPI/VCI:
0/51
Control Distribute VPI/VCI:
0/52
Multicast Send VPI/VCI:
0/53
Multicast Forward VPI/VCI:
0/54
Refer to the ATM Backbone SwitchModule User Guide for definition of terms
and additional information.
and additional information.
Related Command
SHOW BPORT_LEC STATUS
slot.lec
Identifies the slot and LEC for this operation.
slot (1 through 17) is the slot number and
lec is one of up to 64 LAN
Emulation Clients defined as logical ports for the ATM Backbone
SwitchModule. For example, to identify LEC 32 on the ATM Backbone
SwitchModule in slot 4, enter
SwitchModule. For example, to identify LEC 32 on the ATM Backbone
SwitchModule in slot 4, enter
4.32
show bport_lec
slot.lec
server_circuits