3com 5104M-FIB User Manual
CLEAR LOG MODULE EVENT_LOG
2-19
CLEAR LOG MODULE
EVENT_LOG
EVENT_LOG
Use the CLEAR LOG MODULE EVENT_LOG command to erase the event_log
information from the SwitchModule NVRAM.
information from the SwitchModule NVRAM.
If you are running SwitchModule code Version v1.00, the following message is
displayed:
displayed:
Module’s software version does not support this feature
.
This command supports only SwitchModule Version v1. 10 or later.
Format
Example
The following command clears SwitchModule event log information from
SwitchModule NVRAM:
SwitchModule NVRAM:
CB5000> clear log module 2 event_log
Module 2 event log is cleared.
Related Command
SHOW LOG MODULE EVENT_LOG
slot
Specifies the slot number of the SwitchModule.
clear log
event_log
module
slot