3com 5104M-FIB User Manual
SHOW SECURITY ETHERNET_MAP 2-383
SHOW SECURITY
ETHERNET_MAP
ETHERNET_MAP
Use the SHOW SECURITY ETHERNET_MAP command to display all MAC addresses
within the specified network.
within the specified network.
Format
Example
The following command displays the MAC addresses for the specified port 1 in
slot 10:
slot 10:
CB5000> show security ethernet_map network ethernet_1
Network Map for Network Ethernet_1:
MAC Address(s)
SLOT
PORT
-----------------
----
----
01-01-01-01-01-01
10
1
08-00-8f-01-02-03
10
1
08-00-8f-02-03-04
10
1
Related Command
SET SECURITY PORT MODE
show security ethernet_map
port
network
mac_address
mac address
ethernet_1 through
ethernet_8
ethernet_8
slot.subslot
mac_address
Source addresses. The number of MAC addresses does not exceed the
maximum_security_addresses_per_port, which is 8.
maximum_security_addresses_per_port, which is 8.
mac address
The MAC address entry for which you want to display information.
network
Selects the network to display the MAC addresses.
ethernet_1 through
ethernet_8
ethernet_8
Specifies the specific Ethernet network for which you want to display the
security ethernet map.
security ethernet map.
port
Identifies the port for this operation.
slot.subslot
Selects a module installed in the hub to display all of its port MAC
addresses.
addresses.
slot (1 through 17) is the location of a module in the hub and subslot is
the port number on the specified module.
the port number on the specified module.