3com 5104M-FIB User Manual
SET BPORT_LEC MAX_RETRY_COUNT
2-81
SET BPORT_LEC
MAX_RETRY_COUNT
MAX_RETRY_COUNT
Use the SET BPORT_LEC MAX_RETRY_COUNT command to specify the
maximum number of retries for a LAN Emulation Address Resolution Protocol
(LE-ARP) request following the first failed attempt.
maximum number of retries for a LAN Emulation Address Resolution Protocol
(LE-ARP) request following the first failed attempt.
BPORT is an abbreviation for Bridge Port.
LEC ports are logical ports, all of which overlay one physical ATM/Synchronous
Optical Network (SONET) port.
Optical Network (SONET) port.
Format
Example
The following command sets the maximum number of LE-ARP request retry
attempts for a LAN Emulation Client (LEC) in slot 4, port 1 to 2:
attempts for a LAN Emulation Client (LEC) in slot 4, port 1 to 2:
CB5000> set bport_lec 4.1 max_retry_count 2
Bridge Port 04.01 parameter set.
Related Command
SHOW BPORT_LEC CONFIGURATION
slot.lec
Identifies the slot and LEC for this operation.
slot (1 through 17) is the slot number and
lec is one of up to 64 LAN
Emulation Clients defined as logical ports for the ATM Backbone
SwitchModule. For example, to identify LEC 32 on the ATM Backbone
SwitchModule in slot 4, enter
SwitchModule. For example, to identify LEC 32 on the ATM Backbone
SwitchModule in slot 4, enter
4.32
option
Specify 0 if you do not want the system to retry following the first failed
LE-ARP request attempt.
LE-ARP request attempt.
Specify 1 to set the system to retry one time following the first failed
LE-ARP request attempt.
LE-ARP request attempt.
Specify 2 to set the system to retry two times following the first failed
LE-ARP request attempt.
LE-ARP request attempt.
set bport_lec
max_retry_count
slot.lec
option