Panasonic AV-HS400AE User Manual

4



Press the [DSK] button in the AUX bus selection area to switch the selection of the DSK fill signal (indicator 
lights in amber) and DSK source signal (indicator lights in green).

While the indicator of the [DSK] button is lit in amber, 
press one of the AUX bus crosspoint buttons 1 to 10 
to select the DSK fill signal.
The indicator of the selected AUX bus crosspoint 
button lights in amber. (It lights in red if the selected 
signal is being output from the PGM connector.)

 Lighting in amber

KEY

DSK

PinP

AUX

CLN

PVW

PGM

AUX SOURCE

AUX BUS DELEGATION

AUX

   AMB:FILL / GRN:SOURCE

While the indicator of the [DSK] button is lit in green, 
press one of the AUX bus crosspoint buttons 1 to 10 
to select the DSK source signal.
The indicator of the selected AUX bus crosspoint 
button lights in green. (It lights in red if the selected 
signal is being output from the PGM connector.)
Since the luminance key is operated as a self key, 
the key fill signals are used as the key source 
signals. When the luminance key has been selected 
as the downstream key type, the key signals will 
remain unchanged even when the key source 
signals are switched.

 Lighting in green

KEY

DSK

PinP

AUX

CLN

PVW

PGM

AUX SOURCE

AUX BUS DELEGATION

AUX

   AMB:FILL / GRN:SOURCE



1

  On the KEY menu, turn [F1] to display the FillMatt sub 

menu.

2

  Turn [F], [F3] and [F4] to adjust the Hue, Sat and Lum 

of the fill matte.

Turn [F] to select the preset colour using the Load item, 
and press the [F] switch.  
The Hue, Sat and Lum values are changed to the preset 
colour values.



   To save the values that were set before calling the 

preset colour, refer to “3-10. Preset memory”.