3com 2900 User Manual
4-3
z
Data bits: 8
z
Parity: None
z
Stop bits: 1
z
Flow control: None
z
Emulation: VT100
The specific procedure is as follows:
Step1
Select Start > Programs > Accessories > Communications > HyperTerminal to enter the
HyperTerminal window. The Connection Description dialog box appears, as shown below.
HyperTerminal window. The Connection Description dialog box appears, as shown below.
Figure 4-3
Connection description of the HyperTerminal
Step2
Type the name of the new connection in the Name text box and click OK. The following dialog box
appears. Select the serial port to be used from the Connect using drop-down list.
appears. Select the serial port to be used from the Connect using drop-down list.
Figure 4-4
Set the serial port used by the HyperTerminal connection