3com 10014917 User Manual

2

3Com Switch 4200G Family

 

Command Reference

At the prompt, enter the name of the command followed by a space and 

. For example:

<sw

4200G>

boot ?

The following parameters are displayed:

Exchange the file main-attribute and backup-attribute.

Select a file to boot at the next time

Update Bootrom

Set web resource package

To specify boot loader, enter the command as follows:

<sw4200G>

boot boot-loader ?

You only need to enter ? if parameters exist for the command.

At the prompt, enter 

.

Press <CTRL-Z>.

At the prompt, enter 

.

For further information about how to use the command line interface, refer to the Command Reference Guide and 
the Configuration Guide, which are both available as PDF documents on the CD that accompanied the unit.

access-limit

Use the 

command to set the maximum number of access users that can be contained in 

current ISP domain.

accounting

Use the 

 command to configure an accounting scheme for the current ISP domain.

accounting domain

Use the 

 command to enable the DHCP accounting function.

accounting-on enable

Use the 

 command to enable user re-authentication upon device restart function.

accounting optional

Use the 

 command to open the accounting-optional switch.

acl

Use the 

command to reference ACL and implement the ACL control to the TELNET users.