3com 10014917 User Manual

28

3Com Switch 4200G Family

 

Command Reference

port hybrid pvid vlan

Use the 

 command to configure the default VLAN ID of the hybrid port.

port hybrid vlan

Use the 

 command to add the port to the specified VLAN(s). The port needs to have been 

made a hybrid port before you can do this. See the related command below.

port isolate

Use the 

 command to add an Ethernet port to the isolation group.

port link-aggregation group

Use the 

 agg_id command to add an Ethernet port to a manual or static 

aggregation group.

port link-type

Use the 

 command to configure the link type of the Ethernet port.

port-security enable

Use the 

 command to enable port security.

port-security intrusion-mode

Use the 

 command to set the action mode of the Intrusion Protection 

feature.

port-security max-mac-count

Use the 

 command to set the maximum number of MAC addresses allowed 

to access the port.

port-security ntk-mode

Use the 

command to set the packet transmission mode of the Need to Know 

(NTK) feature.

port-security OUI

Use the 

 to set an OUI value for authentication.

port-security port-mode

Use the 

 command to set the security mode of the port.

port-security timer disableport

Use the 

 command to set the time during which the system temporarily 

disables a port.

port-security trap

Use the 

 command to enable the sending of the specified type(s) of trap messages.

port trunk pvid vlan

Use the 

command to configure the default VLAN ID for a trunk port.

port trunk permit vlan

Use the 

 command to add a trunk port to one VLAN, a selection of VLANs, or all 

VLANs.

primary accounting

Use the 

 command to set the IP address and port number for the primary accounting 

server.