3com 10014917 User Manual
42
3Com Switch 4200G Family
Command Reference
traffic-statistic
Use the
traffic-statistic
command to use ACL rules in traffic identifying and perform traffic statistics on
the packets matching with the ACL rules.
System view
udp-helper enable
Use the
udp-helper enable
command to enable the UDP Helper function.
System view
udp-helper port
Use the
udp-helper port
command to configure the UDP port with relay function.
System view
udp-helper server
Use the
udp-helper server
command to configure the relay destination server for UDP broadcast packets.
VLAN Interface view
undelete
Use the
undelete
command to restore a deleted file.
User view
user
Use the
user
command to switch to a specified user.
FTP Client view
After logging into an FTP server, you can switch to another user by using the
user
command.
user-interface
Using
user-interface
command to enter one or more user interface views to perform configuration.
System view
user-name-format
Use the
user-name-format
command to set the format of the user names to be sent to RADIUS server.
RADIUS Scheme view
user privilege level
Use the
user privilege level level
command to configure the command level that a user can access
from the specified user interface.
User Interface view
verbose
Use the
verbose
command to enable the verbose function, which displays execution and response
information of other related commands.
FTP Client view
virtual-cable-test
Use the
virtual-cable-test
command to enable the system to test the cable connected to a specific port
and to display the results.
Ethernet Port view
vlan
Use the
vlan
command to enter the VLAN view.
System view
Web command: Device -> VLAN
vlan-assignment-mode
Use the
vlan-assignment-mode
command to set the VLAN assignment mode on the switch.
ISP Domain view
vlan-mapping modulo
Use the
vlan-mapping modulo
command to map VLANs to specific spanning tree instances.
MST Region view
vlan-vpn enable
Use the
vlan-vpn enable command
to enable the VLAN-VPN function for a port.
Ethernet Port view
vlan-vpn tpid
Use the
vlan-vpn tpid
command to set a TPID value for a port. The setting takes effect only when the
VLAN-VPN or VLAN-VPN uplink function is enabled.
Ethernet Port view
vlan-vpn tunnel
Use the
vlan-vpn tunnel
command to enable the BPDU tunnel function.
System view