Enterasys Networks CSX7000 User Guide
USER’S GUIDE
598 CyberSWITCH
DHCP stats clear
Clears the DHCP statistics.
ip addrpool
Displays the current IP address pool. Refer to the
ip addrpool
command description under
.
D
IGITAL
M
ODEM
C
OMMANDS
These commands allow you to display active connections, display or erase digital modem statistics,
add or delete individual modems and upgrade modem firmware when necessary.
add or delete individual modems and upgrade modem firmware when necessary.
modem add <slot #> <modem #>
Adds a previously-deleted modem back to the available list for devices (i.e., after testing).
modem delete <slot #> <modem #>
Deletes a modem from the available list for devices. This command is useful in the event you
have a faulty modem and wish to temporarily disable it for troubleshooting purposes. Use this
command in conjunction with the
have a faulty modem and wish to temporarily disable it for troubleshooting purposes. Use this
command in conjunction with the
modem add
and
modem status
commands.
modem reset <slot #> <modem #>
Resets the specified DM-24 or DM-30 modems on a particular slot. Does not affect other
modems on the board. A modem currently in use cannot be reset. DM-8 modems cannot be
reset.
modems on the board. A modem currently in use cannot be reset. DM-8 modems cannot be
reset.
modem restart <slot #>
Restarts the digital modem board (i.e., if an unrecoverable problem occurs). This command
does not affect any other boards within the system.
does not affect any other boards within the system.
modem stats <slot #><modem #>
Displays the digital modem statistics associated with the specified modem. For a listing of
available statistics and their definitions, refer to
available statistics and their definitions, refer to
.
modem stats clear <slot #><modem #>
Clears the digital modem statistics associated with the specified modem.
modem status <slot #>
Displays the slots that have valid digital modem (DM) boards. If the command is executed
using a specific valid DM board slot, displays the modems available for usage from specified
slot.
using a specific valid DM board slot, displays the modems available for usage from specified
slot.
modem upgrade <slot #> <all>
Installs new modem firmware by reprogramming the specified modem’s flash memory.
Periodically, you may want (or need) to add new firmware to DM-24, DM-24+, or DM-30+
modems. To do so, you would need to load the new modem file onto the CyberSWITCH
modems. To do so, you would need to load the new modem file onto the CyberSWITCH
C:\system
directory. Then to reprogram the modems, issue the
modem upgrade
command,
which upgrades all the modems on the card:
modem upgrade <slot #> <all>