3com 3.01.01 User Manual
Setting Terminal Parameters
11
Figure 11 Set the Dialed Number
Figure 12 Dial the Remote PC
4 Enter the preset login password on the remote terminal emulator and wait for the
<SW8800>
prompt.
5 Use the appropriate commands to configure the Switch 8800 or view its
operational state. Enter
?
to get immediate help. For details on a specific
command, refer to the appropriate chapter in this guide.
By default, after login, a modem user can access the commands at Level 0.
Configuring the User
Interface
User interface configuration is another way to configure and manage port data.
The Switch 8800 supports the following configuration methods:
■
Local configuration through the console port
■
Remote configuration through Telnet on the Ethernet port