3com 3.01.01 User Manual

FTP Server configuration includes tasks described in the following sections:

■

■

■

■

You can use the following commands to enable or disable the FTP server. Perform 
the following configuration in system view.

The FTP server supports multiple user access. A remote FTP client sends a request 
to the FTP server. Then, the FTP server carries out the corresponding operation and 
returns the result to the client.

By default, the FTP server is disabled.

You can use the following commands to configure FTP server authentication and 
authorization. The authorization information of the FTP server includes the top 
working directory provided for FTP clients.

Perform the following configuration in system view.

Only clients who have passed the authentication and authorization successfully 
can access the FTP server.

You can use the following commands to configure the connection timeout of the 
FTP server. If the FTP server does not receive a service request from the FTP client 

Table 8   Enable/Disable FTP Server

Enable the FTP server

Disable the FTP server

Table 9   Configure the FTP Server Authentication and Authorization

Create new local user and enter local user 
view (system view)

local-user username 

Delete local user (system view)

undo local-user [ username | all [ 
service-type ftp ]]

Configure password for local user (local user 
view)

password [ cipher | simple ] password

Configure service type for local user (local user 
view)

service-type ftp ftp-directory directory

Cancel password for local user (local user 
view)

Cancel service type for local user (local user 
view)

undo service-type ftp [ftp-directory]