3com 2924-PWR User Manual
172
C
HAPTER
13: C
ONFIGURING
Q
UALITY
OF
S
ERVICE
Defining Bandwidth
Settings
The Bandwidth Setup Page allows network managers to define the
bandwidth settings for a specified interface. Interface shaping can be
based on an interface. Shaping is determined by the lower specified
value. The interface shaping type is selected in the Bandwidth Setup
Page.
bandwidth settings for a specified interface. Interface shaping can be
based on an interface. Shaping is determined by the lower specified
value. The interface shaping type is selected in the Bandwidth Setup
Page.
The monitor user has no access to this page.
To configure Bandwidth Settings:
1 Click Device > QoS > Bandwidth > Setup. The Bandwidth Setup Page
opens:
Figure 85 Bandwidth Setup Page
The Bandwidth Setup Page contains the following fields:
Ingress Rate Limit
■
Enable Ingress Rate Limit — Enables setting an Ingress Rate Limit.
■
Ingress Rate Limit — Defines the ingress traffic limit for the port. The
field range is 3,500-1,000,000 kbits per second.
field range is 3,500-1,000,000 kbits per second.