3com 3848 User Manual
32
C
HAPTER
3: S
ETTING
U
P
FOR
M
ANAGEMENT
addresses to be configured so that you know what IP address will be
allocated to the Switch. Refer to the documentation that accompanies
your DHCP server.
allocated to the Switch. Refer to the documentation that accompanies
your DHCP server.
For a detailed description of how automatic IP configuration operates,
please refer to the Implementation Guide on the CD-ROM that
accompanies your Switch or on the 3Com Web site.
please refer to the Implementation Guide on the CD-ROM that
accompanies your Switch or on the 3Com Web site.
You should use the automatic IP configuration method if:
■
your network uses DHCP to allocate IP information, or
■
flexibility is needed. If the Switch is re-deployed onto a different
subnet, it will automatically reconfigure itself with an appropriate IP
address, instead of you having to manually reconfigure the Switch.
subnet, it will automatically reconfigure itself with an appropriate IP
address, instead of you having to manually reconfigure the Switch.
If you use the automatic IP configuration method, you need to discover
the automatically allocated IP information before you can begin
management. Work through the
the automatically allocated IP information before you can begin
management. Work through the
.
Preparing for
Management
Once your Switch’s initial set up is complete you can set up your chosen
management method as described in
management method as described in
on
.
For detailed information about the specific web interface operations and
command line interface commands and problem solving, refer to the
“Management Interface Reference Guide” on the CD-ROM that is
supplied with the Switch or on the 3Com Web site.
command line interface commands and problem solving, refer to the
“Management Interface Reference Guide” on the CD-ROM that is
supplied with the Switch or on the 3Com Web site.
Manually
Configuring IP
Information
Configuring IP
Information
You can manually configure the Switch IP information in the following
way:
way:
■
Connecting to the console port — connect a workstation using a
console cable to the console port of the Switch. You can then
manually enter IP information using the command line interface (CLI).
console cable to the console port of the Switch. You can then
manually enter IP information using the command line interface (CLI).
Connecting to the
Console Port
To set up your Switch manually you can alternatively make a connection
to the console port (this example describes a local connection to the
console port, rather than a remote one via a modem). You can do this
whilst the Switch is offline, that is, before you connect the Switch to a
network, or whilst the Switch is online, that is, connected to a network.
to the console port (this example describes a local connection to the
console port, rather than a remote one via a modem). You can do this
whilst the Switch is offline, that is, before you connect the Switch to a
network, or whilst the Switch is online, that is, connected to a network.
dua1740-0aaa03.book Page 32 Thursday, December 23, 2004 9:23 PM