3com 2250-SFP User Manual

The ? command displays a list of CLI commands on the 
device.

This command has no default configuration.

There are no user guidelines for this command.

The following displays the list presented for the ? 
command:

Select menu option#?

This command line console allows you to configure 
and manage your system by making selections from 
the displayed menu.

You can enter successive menu choices on the same 
line instead of pressing the [Return] key after 
each selection. For example, if you are at the 
top level menu and wish to display the system 
configuration, enter "system summary".

To specify a menu choice you need only type a 
unique abbreviation.

For example, "system summary" can be abbreviated 
"sy s".

To return to a previous menu, type "q".

To return to the top level menu or abort an 
action, press the [Esc] key.

-- Enter <CR> to continue --:

Menu options: --------3Com Baseline Switch 
2426-PWR Plus-----------------------

 ?             - Displays Help information

 initialize    - Reset the device to factory 
default, except IP.

 ipSetup       - Configures IP address.

 logout        - Logout from this session.

 ping          - Ping a remote station.

 password      - Change password.

 reboot        - Power cycles the device.

 summary        - Summarises IP setup and software 
versions.

 upgrade       - Software upgrade over TFTP.

Type ? for help.

-----------------3Com Baseli (1)--------------

Select menu option: