Enterasys Networks 4H4284-49 User Manual

Page of 90
Completing the Installation
Matrix DFE-Gold Series Modules Hardware Installation Guide 3-29
Logging in with an Administratively-Configured User Account
If the device’s default user account settings have been changed, proceed as follows:
1.
At the login prompt, enter your administratively‐assigned user name and press 
ENTER.
2.
At the Password prompt, enter your password and press ENTER.
The notice of authorization and the Matrix prompt displays as shown back in 
The DFE‐Gold module is now ready to be configured. For information about setting the IP 
address and configuring Telnet settings for remote access to DFE management, refer to 
Chapter 3 in the Enterasys Matrix DFE‐Gold Series Configuration Guide. The CLI commands 
enable you to initially set up and perform more involved management configurations. 
The Enterasys Matrix DFE‐Gold Series Configuration Guide is available online at:
If you require assistance, contact Enterasys Networks using one of the methods described 
in 
Note: Users with Read-Write (rw) and Read-Only access can use the set password 
command to change their own passwords. Administrators with Super User (su) access 
can use the set system login command to create and change user accounts, and the set 
password
 command to change any local account password. For information on the set 
password and set system login commands, refer to Chapter 3 in the Enterasys Matrix 
DFE-Gold Series Configuration Guide
.