Dynex DX-GB5PRT Leaflet

Page of 2
Network 
storage
PC
Switch
Router
Modem
Internet
Internet
Modem
Router
Switch
Internet
Power cord
Switch
Power
outlet
PC
Switch
Network 
storage
DX-GB5PRT
5-Port Gigabit Ethernet Switch
Congratulations on your purchase of the DX-GB5PRT Dynex 5-Port 
Gigabit Ethernet Switch. The DX-GB5PRT provides increased speed and 
backbone connections to make Gigabyte a reality. 
Safety Notices
•  Do not use this product near water, for example, in a wet basement 
or near a swimming pool.
•  Avoid using this product during an electrical storm. There may be a 
remote risk of electric shock from lightning.
•  Do not place heavy objects on the switch.
•  Allow room for adequate ventilation.
Package contents
•  DX-GB5PRT Dynex 5-Port Gigabit Ethernet Switch
•  Quick Setup Guide
Features
•  Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p 
standards
•  Five 10/100/1000M RJ45 ports
•  Supports IEEE 802.1p QoS
•  Support Green Ethernet technology to implement power saving 
features. (In Low Power Idle mode, up to 61.5% of the power can be 
saved.)
•  Supports IEEE 802.3x flow control for full-duplex mode and 
backpressure for half-duplex mode
•  Non-blocking switching architecture that forwards and filters 
packets at full wire-speed for maximum throughput
•  8K entry MAC address table of the DX-GB5PRT with auto-learning 
and auto-aging
•  Supports for Jumbo frames of up to 15 KB
•  LED indicators for monitoring power, link, and activity
Components
Front panel
Back panel
QUICK SETUP GUIDE
Installing the switch
1  Connect the power adapter to the switch and power outlet. 
2  Connect the PC(s) and other device(s) to the switch.
3  Connect the switch to the Internet.
4  Install complete connection.
LED indicators
When the switch is plugged in and receiving power, the LED indicators 
respond as follows:
LED
Power
Link/Act
Ports 1-5
Status
On (green)
Off
On (orange)
Flashing (orange)
On (green)
Flashing (green)
Indication
Power on
No device is connected to the corresponding port.
A 10/100 Mbps device is connected to the corresponding port.
A 10/100 Mbps device is transmitting or receiving data
through the corresponding port.
A 1000Mbps device is connected to the corresponding port.
A 1000Mbps device is transmitting or receiving data through 
the corresponding port.
Power port
Ports 1-5
Power LED
LEDs 1-5
DX-GB5PRT_10-1123_QSG_V1.eps   1   10/29/2010   10:16:02 AM
DX-GB5PRT_10-1123_QSG_V1.eps   1   10/29/2010   10:16:02 AM
V1
FINAL
FOR PRINT