Enterasys Networks 6G3xx User Guide

Reboot After 
Download 
(Toggle)

Set the switch module so it will either reboot or not reboot after 
completing the download of an image. This field toggles between YES 
and NO, when the Download Method field is set to RUNTIME.

If YES is selected, the module reboots after the download is completed. 
If NO is selected, the module continues using the existing firmware 
image and stores the new firmware image in FLASH memory. The next 
time the switch module is reset or powered-up, the module boots from 
FLASH memory using the new image.

When the Download Method field is set to DOWNLOAD CONFIG, 
the setting defaults to YES and cannot be changed. In UPLOAD 
CONFIG, the setting defaults to NO and cannot be changed.

TFTP Gateway IP 
Addr 
(Modifiable)

Enter the IP address of the TFTP gateway server defined on the 
General Configuration screen in 

.

Download Server IP 
(Modifiable)

Select the IP address of the TFTP server to be used for the download or 
upload.

Download File 
Name 
(Modifiable)

Select the complete TFTP server path and file name of the new image 
or configuration file.

Last Image Server 
IP 
(Read-Only)

See the IP address of the server used for the previous download or 
upload.

Last Image File 
Name 
(Read-Only)

See the complete path and file name of the last downloaded image.

Transfer Status
(Read-Only)

See the status of the current or most recent download or upload.