Enterasys Networks 6G3xx User Guide

VID
– top of screen 
(Selectable)

See the VLAN Identifications (VIDs) currently associated with a 
protocol classification. To see which ports are assigned to a 
VID/Classification, or to add/remove a port from a VID/Classification, 
use the Protocol Port Configuration screen. For details, refer to 

Classification 
– top of screen 
(Selectable)

See the classification associated with the VLAN in the VID column. 
This field may be selected after the screen is saved to call up the 
Protocol Port Configuration screen.

Description
(Selectable)

See a brief description of the classification.

VID
– bottom of screen 
(Modifiable)

Enter a VLAN Identification (VID) to be associated with the 
classification selected in the Classification field. For details on how to 
enter the VID/Classification, refer to 

CLASSIFICATION 
– bottom of screen
(Selectable)

Select the classification that will be associated with the VLAN entered 
in the VID field. There can be up to three fields involved 
(CLASSIFICATION, IP ADDRESS, and MASK), depending on the 
classification selected. At the time of this printing, the selections 
available in each field are listed in 

.

NOTE: Besides the VID selected, the order in which a frame is 
transmitted also depends on the Classification Precedence 
Rules discussed in 

. These rules come into effect 

when there are multiple classifications configured in the switch 
module.

For details on how to use the VLAN Classification Configuration 
screen to select the classification rule, refer to 

ADD 
(Command)

Add the current Classification Rule (VID and Classification selections) 
to the screen. For details about how to add an entry, refer to