EMC DS-32B2 User Manual
1
1-118
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
diagmodepr
Enable or disable mode messages.
Syntax
diagmodepr [mode | -show]
Availability
Admin
Description
Use this command to enable print mode. The mode is saved in
nonvolatile memory and stays in that mode until the next execution
of
nonvolatile memory and stays in that mode until the next execution
of
diagmodepr
.
The mode becomes active as soon as this command is executed. It
does not require a reboot to take effect.
does not require a reboot to take effect.
Print mode when enabled will cause extra messages to be displayed
in the burn-in and post scripts. The exact behavior varies depending
on the script being run.
in the burn-in and post scripts. The exact behavior varies depending
on the script being run.
Operands
This command has the following operands:
If no operand is specified the current value is displayed.
Example
To enable print mode messages:
switch:admin> diagmodepr 1
Mode print disable is now 0 (Enabled).
Config update Succeeded
switch:admin> diagmodepr 0
Mode print disable is now 1 (Disabled).
Config update Succeeded
switch:admin>
Config update Succeeded
switch:admin> diagmodepr 0
Mode print disable is now 1 (Disabled).
Config update Succeeded
switch:admin>
See Also
diagHelp
mode
Specify 1 to enable print mode; specify 0 to
disable print mode. This operand is optional
disable print mode. This operand is optional
-show
Specify this operand to display the current
mode. This operand is optional.
mode. This operand is optional.