EMC DS-32B2 User Manual
1
1-148
EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
fanEnable
Enable a fan unit.
Syntax
fanEnable unit
Availability
Admin
Description
Use this command to set the fan unit back to the default RPM speed
only if the fan unit has been previously disabled using the
only if the fan unit has been previously disabled using the
fanDisable
command.
Operand
This command has the following operand:
Example
To enable a fan that has been disabled:
switch:admin> fanenable 1
Fan unit 1 has been enabled
switch:admin> fanshow
switch:admin> fanshow
Fan #1 is OK, speed is 2237 RPM
Fan #2 is OK, speed is 2537 RPM
Fan #3 is OK, speed is 2463 RPM
Fan #2 is OK, speed is 2537 RPM
Fan #3 is OK, speed is 2463 RPM
See Also
fanShow
fanDisable
fanDisable
unit
Specify the fan’s unit number. View the fan unit
numbers using the
numbers using the
fanShow
command. This
operand is required.