EMC DS-32B2 User Manual
1
fazoneAdd
1-151
Telnet Commands
fazoneAdd
Add a member to a Fabric Assist zone.
EMC does not support this command.
Syntax
fazoneAdd “fazoneName”,“member; member”
Availability
Admin
Description
Use this command to add one or more members to an existing Fabric
Assist zone.
Assist zone.
This command does not change the defined configuration (which you
can view using the
can view using the
cfgShow
command) until the
cfgSave
command
is issued. For the change to become effective, an appropriate Fabric
Assist zone configuration must be enabled using the
Assist zone configuration must be enabled using the
cfgEnable
command. For the change to be preserved across switch reboots, it
must be saved to nonvolatile memory using the
must be saved to nonvolatile memory using the
cfgSave
command.
Operands
This command has the following operands:
fazoneName
Specify the name for the Fabric Assist zone
in quotation marks. This operand is
required.
in quotation marks. This operand is
required.
member
Specify a list of Fabric Assist zone
members. The list must be enclosed in
quotation marks, and each member must be
separated by a semicolon. A member can be
specified by one or more of the following
methods:
members. The list must be enclosed in
quotation marks, and each member must be
separated by a semicolon. A member can be
specified by one or more of the following
methods:
◆
Enter a fabric domain and area number
pair. View the area numbers for ports
using the
pair. View the area numbers for ports
using the
switchShow
command.
◆
WWNs.
◆
Fabric Assist zone alias names.
◆
Exactly one Fabric Assist host member.
This operand is required.