EMC DS-32B2 User Manual

Set Ethernet and FC IP addresses.

ipAddrSet [option]

Admin

For v4.0 you must set values for both logical switches and both CP 
cards in the ED- 12000B chassis. The option operand is available in 
v4.0. If the option operand is not specified, the command becomes 
interactive. 

In v4.0, you are prompted to set the values as shownin Table 1-15:

The default values for hostname, ipaddress, subnet address (for CP 
only), mask (for switch only), and gateway address (for CPs only) are:

◆

sw0 = hostname SW12000_1, ip 10.77.77.77, mask 255.0.0.0

◆

sw1 = hostname SW12000_2, ip 10.77.77.76, mask 255.0.0.0

Ethernet IP Address

Set the Ethernet IP Address for both 
logical switches and both CP blades.

Ethernet Subnetmask

Set the Ethernet Subnetmask address 
for both logical switches and both CP 
blades.

Fibre Channel IP 

Address

Set the Fibre Channel IP Address for 
both logical switches.

Fibre Channel 

Subnetmask

Set the Fibre Channel Subnetmask for 
both logical switches.

Hostname of CP

Set the Hostname for both CP blades.

Gateway IP Address

Set the Gateway IP Address for both 
CP blades.