EMC DS-32B2 User Manual

Add a monitor for the SCSI Read and Write commands.

perfAddRWMonitor [slotnumber/]portnumber[, "alias"]

Admin

Use this command to define filter-based monitors to count the 
number of SCSI FCP Read and Write commands in Fibre Channel 
frames.

After a successful execution of this command, a monitor number is 
displayed. The monitor number is provided for easy manipulation of 
these filter-based performance monitors. The optional user defined 
alias is also displayed if one was specified. All valid monitor 
numbers and user-defined aliases can be retrieved with the 

perfShowFilterMonitor

 command.

The maximum number of filters is eight per port including user 
defined filters, read filters, write filters, and read/write filters.

This command has the following operands:

slotnumber

Specify the slot number in an ED-12000B switch. 
The slot number must be followed by a slash ( / ) 
and the port number. 

The ED-12000B has a total of 10 slots counted 
from 1 to 10. Slot number 5 and 6 are control 
processor cards, and slot 1 through 4 and 7 
through 10 are switch cards. On each switch card, 
there are 16 ports counted from the bottom 0 to 15. 
A particular port must be represented by both slot 
number (1 through 4 or 7 through 10) and port 
number (0 through 15).

This operand is not required for switches that do 
not have blades.