EMC DS-32B2 User Manual

Add a filter-based monitor for the SCSI Write command.

perfAddWriteMonitor [slotnumber/]portnumber[, "alias"]

Admin

Use this command to define filter-based monitors to count the 
number of SCSI FCP Write commands in Fibre Channel frames.

After a successful execution of this command, a monitor number is 
displayed. The monitor number is provided for easy manipulation of 
these filter-based performance monitors. The optional user-defined 
alias is also displayed if one was specified. All valid monitor 
numbers and user-defined aliases can be retrieved with the 

perfShowFilterMonitor

 command.

The maximum number of filters is eight per port, including 
user-defined filters, read filters, write filters and read/write filters.

This command requires a Performance Monitoring license.

This command has the following operands:

slotnumber

Specify the slot number in an ED-12000B switch. The 
slot number must be followed by a slash ( / ) and the 
port number. 

The ED-12000B has a total of 10 slots counted from 1 
to 10. Slot number 5 and 6 are control processor 
cards, and slot 1 through 4 and 7 through 10 are 
switch cards. On each switch card, there are 16 ports 
counted from the bottom 0 to 15. A particular port 
must be represented by both slot number (1 through 
4 or 7 through 10) and port number (0 through 15).

This operand is not required for switches that do not 
have blades.