EMC DS-32B2 User Manual
1
portStatsShow
1-363
Telnet Commands
Operands
This command has the following operand:
slotnumber
Specify the slot number in an ED-12000B switch.
The slot number must be followed by a slash ( / )
and the port number.
The slot number must be followed by a slash ( / )
and the port number.
The ED-12000B has a total of 10 slots counted
from 1 to 10. Slot number 5 and 6 are control
processor cards, and slot 1 through 4 and 7
through 10 are switch cards. On each switch card,
there are 16 ports counted from the bottom 0 to 15.
A particular port must be represented by both slot
number (1 through 4 or 7 through 10) and port
number (0 through 15).
from 1 to 10. Slot number 5 and 6 are control
processor cards, and slot 1 through 4 and 7
through 10 are switch cards. On each switch card,
there are 16 ports counted from the bottom 0 to 15.
A particular port must be represented by both slot
number (1 through 4 or 7 through 10) and port
number (0 through 15).
This operand is not required for switches that do
not have blades.
not have blades.
portnumber
Specify the port number to be displayed. Valid
values for port number vary depending on the
switch type. This operand is required.
values for port number vary depending on the
switch type. This operand is required.